Genome-based characterization of a novel prophage of Vibrio parahaemolyticus, VPS05ph1, a novel member of Peduoviridae.

Vibrio parahaemolyticus is a globally important bacterium related to climate warming and health threat to human and marine animals. Yet, there is limited knowledge about its polylysogeny harboring multiple prophages and the genetic information. In this study, two prophages (VPS05ph1 and VPS05ph2) were identified in a V. parahaemolyticus isolate through genomic and transcriptional analyses. Both prophages were determined as HP1-like phages, located in a novel phylogenetic lineage of Peduoviridae. They shared a moderate genome-wide sequence similarity with each other and high synteny with the closest relatives, but showed low identities to the repressor counterparts of the representative phages within the family. In addition, no bacterial virulence genes, antibiotic resistance genes and known phage-encoded lytic proteins were identified on both prophage genomes. Moreover, the V. parahaemolyticus isolate was induced with mitomycin, which caused aberrant cellular morphology and nonviability of bacterial cells and excision of prophage VPS05ph1, accompanied by the respective inhibition and promotion of transcriptions of the cI-like and cox-like regulator genes for phage decision making. Results in this study provide the genetic context of polylysogeny in the V. parahaemolyticus isolate, support the diversity and prevalence of HP1-like phages in vibrios, and promote to explore interactions between the HP1-like prophage and its vibrio host.

CO2-Promoted Electrocatalytic Reduction of Chlorinated Hydrocarbons.

Electrochemical reactions and their catalysis are important for energy and environmental applications, such as carbon neutralization and water purification. However, the synergy in electrocatalysis between CO2 utilization and wastewater treatment has not been explored. In this study, we find that the electrochemical reduction of chlorinated organic compounds such as 1,2-dichloroethane, trichloroethylene, and tetrachloroethylene into ethylene in aqueous media, which is a category of challenging reactions due to the competition of H2 evolution, can be substantially enhanced by simultaneously carrying out the reduction of CO2 on an easily prepared and cost-effective Cu metal catalyst. In the case of 1,2-dichloroethane dechlorination, a 6-fold improvement in Faradaic efficiency and a 19-fold increase in partial current density are demonstrated. Through electrochemical kinetic studies, in situ Raman spectroscopy, and computational simulations, we further find that CO2 reduction reduces hydrogen coverage on the Cu catalyst, which not only exposes more active sites for the dechlorination reaction but also enhances the effective reductive potential on the catalyst surface and reduces the kinetic barrier of the rate-determining step.

Differential Microbial Composition and Interkingdom Interactions in the Intestinal Microbiota of Holstein and German Simmental × Holstein Cross F1 Calves: A Comprehensive Analysis of Bacterial and Fungal Diversity.

Calf intestines are colonized by rich and complex microbial communities, playing a crucial role in animal physiology, metabolism, nutrition, and immune function. In this study, we provide insight into the composition of fecal microbial bacteria and fungi, respectively, as well as the cross-kingdom interactions. We investigated the intestinal microbiota of different breeds of calves by characterizing the bacterial and fungal communities in the rectal feces of Holstein calves and German Simmental × Holstein cross F1 generation (GXH) using 16S rRNA and ITS amplicon sequencing techniques. PICRUSt2 (version 2.2.0) were used to determine microbial diversity and function and explore the reasons why Holstein calves are more susceptible to diarrhea. The results revealed no significant difference in the diversity of fecal microbiota among the groups (p > 0.05). We identified Firmicutes, Bacteroidetes, and Proteobacteria as the dominant bacterial phyla in the fecal bacterial communities of the two breeds of calves. Ascomycota and Basidiomycota play important roles in the fungal community but differ in relative abundance. Bacteroides was the dominant genus at the group level for calf fecal microbiota in both breeds. The relative abundance of Prevotella, Escherichia-Shigella, Peptostreptococcus, and Butyricicoccus was higher in Holstein calves, and the relative abundance of Faecalibacterium, Megamonas, Butyricicoccus, and Alloprevotella was lower than GXH group. Aspergillus and Cladosporium were the dominating genera of fecal fungi in both groups of calves. LEfSe analysis revealed 33 different bacteria and 23 different fungi between the two groups, with more differential strains found in GXH. In addition, the feces fungi-bacteria interkingdom interactions varied among breeds. Thus, the composition and structure of bacterial and fungal communities in calf feces varied by breed, indicating a potential association between breed and microbial communities. We also found differences in the network between bacterial-fungal kingdoms. We explain the reasons for Holstein calves being more prone to diarrhea. This indicated that breed makes differences in calf diarrhea rates by influencing gut microbial composition and interactions.

Prognostic significance of glucose-lipid metabolic index in pancreatic cancer patients with diabetes mellitus.

BACKGROUND: The incidence of pancreatic cancer (PC) is higher in diabetic patients due to disturbances in glucose and lipid metabolism caused by insulin resistance (IR). However, the effect of diabetes as well as IR on the prognosis of PC patients remains inconclusive. Our study aims to assess the impact of IR on the prognosis of PC patients with diabetes. METHODS: We conducted a retrospective analysis of 172 PC patients with diabetes in our institute from 2015 to 2021. Prognostic assessment was performed using univariate/multifactorial analysis and survival analysis. The predictive efficacy of metabolic indices was compared using receiver operator characteristic (ROC) curve analysis. RESULTS: One hundred twenty-one of 172 patients died during follow-up, with a median follow-up of 477 days and a median overall survival (OS) of 270 days. Survival analysis showed a significant difference in OS by IR related parameters, which were triglyceride-glucose index (TyG), triglyceride-glucose index-body mass index (TyG-BMI), and triglyceride/high-density lipoprotein cholesterol ratio (TG/HDL-c). The ROC curve indicated that TyG, TyG-BMI, and TG/HDL-c had prognostic efficacy for PC with diabetes. We next optimized TyG-BMI and obtained a new parameter, namely glucose-lipid metabolism index (GLMI), and the patients were classified into GLMI low group and high group based on the calculated cutoff value. The GLMI high group had higher TyG, TyG-BMI, TyG/HDL-c, BMI, TG, total cholesterol (TC), TC/HDL-c, fasting plasma glucose, CA199, and more advanced tumor stage compared to low group. Univariate and multivariate analyses showed that GLMI was an independent prognostic factor. Furthermore, the patients of GLMI high group had worse OS compared to low group and the ROC curves showed GLMI had better predictive ability than TyG and TyG-BMI. CONCLUSIONS: IR is associated with the outcome of PC patients with diabetes and higher level of IR indicates worse prognosis. GLMI has a good predictive value for PC with diabetes.

Coordination of copper within a crystalline carbon nitride and its catalytic reduction of CO2.

Inherently disordered structures of carbon nitrides have hindered an atomic level tunability and understanding of their catalytic reactivity. Starting from a crystalline carbon nitride, poly(triazine imide) or PTI/LiCl, the coordination of copper cations to its intralayer N-triazine groups was investigated using molten salt reactions. The reaction of PTI/LiCl within CuCl or eutectic KCl/CuCl2 molten salt mixtures at 280 to 450 °C could be used to yield three partially disordered and ordered structures, wherein the Cu cations are found to coordinate within the intralayer cavities. Local structural differences and the copper content, i.e., whether full or partial occupancy of the intralayer cavity occurs, were found to be dependent on the reaction temperature and Cu-containing salt. Crystallites of Cu-coordinated PTI were also found to electrophoretically deposit from aqueous particle suspensions onto either graphite or FTO electrodes. As a result, electrocatalytic current densities for the reduction of CO2 and H2O reached as high as ∼10 to 50 mA cm-2, and remained stable for >2 days. Selectivity for the reduction of CO2 to CO vs. H2 increases for thinner crystals as well as for when two Cu cations coordinate within the intralayer cavities of PTI. Mechanistic calculations have also revealed the electrocatalytic activity for CO2 reduction requires a smaller thermodynamic driving force with two neighboring Cu atoms per cavity as compared to a single Cu atom. These results thus establish a useful synthetic pathway to metal-coordination in a crystalline carbon nitride and show great potential for mediating stable CO2 reduction at sizable current densities.

Spatially selective defect management of CsPbI3 films for high-performance carbon-based inorganic perovskite solar cells.

Defects formed at the surface, buried interface and grain boundaries (GB) of CsPbI3 perovskite films considerably limit photovoltaic performance. Such defects could be passivated effectively by the most prevalent post modification strategy without compromising the photoelectric properties of perovskite films, but it is still a great challenge to make this strategy comprehensive to different defects spatially distributed throughout the films. Herein, a spatially selective defect management (SSDM) strategy is developed to roundly passivate various defects at different locations within the perovskite film by a facile one-step treatment procedure using a piperazine-1,4-diium tetrafluoroborate (PZD(BF4)2) solution. The small-size PZD2+ cations could penetrate into the film interior and even make it all the way to the buried interface of CsPbI3 perovskite films, while the BF4- anions, with largely different properties from I- anions, mainly anchor on the film surface. Consequently, virtually all the defects at the surface, buried interface and grain boundaries of CsPbI3 perovskite films are effectively healed, leading to significantly improved film quality, enhanced phase stability, optimized energy level alignment and promoted carrier transport. With these films, the fabricated CsPbI3 PSCs based on carbon electrode (C-PSCs) achieve an efficiency of 18.27%, which is among the highest-reported values for inorganic C-PSCs, and stability of 500 h at 85 °C with 65% efficiency maintenance.

Identifying sensors-based parameters associated with fall risk in community-dwelling older adults: an investigation and interpretation of discriminatory parameters.

BACKGROUND: Falls pose a severe threat to the health of older adults worldwide. Determining gait and kinematic parameters that are related to an increased risk of falls is essential for developing effective intervention and fall prevention strategies. This study aimed to investigate the discriminatory parameter, which lay an important basis for developing effective clinical screening tools for identifying high-fall-risk older adults. METHODS: Forty-one individuals aged 65 years and above living in the community participated in this study. The older adults were classified as high-fall-risk and low-fall-risk individuals based on their BBS scores. The participants wore an inertial measurement unit (IMU) while conducting the Timed Up and Go (TUG) test. Simultaneously, a depth camera acquired images of the participants' movements during the experiment. After segmenting the data according to subtasks, 142 parameters were extracted from the sensor-based data. A t-test or Mann-Whitney U test was performed on the parameters for distinguishing older adults at high risk of falling. The logistic regression was used to further quantify the role of different parameters in identifying high-fall-risk individuals. Furthermore, we conducted an ablation experiment to explore the complementary information offered by the two sensors. RESULTS: Fifteen participants were defined as high-fall-risk individuals, while twenty-six were defined as low-fall-risk individuals. 17 parameters were tested for significance with p-values less than 0.05. Some of these parameters, such as the usage of walking assistance, maximum angular velocity around the yaw axis during turn-to-sit, and step length, exhibit the greatest discriminatory abilities in identifying high-fall-risk individuals. Additionally, combining features from both devices for fall risk assessment resulted in a higher AUC of 0.882 compared to using each device separately. CONCLUSIONS: Utilizing different types of sensors can offer more comprehensive information. Interpreting parameters to physiology provides deeper insights into the identification of high-fall-risk individuals. High-fall-risk individuals typically exhibited a cautious gait, such as larger step width and shorter step length during walking. Besides, we identified some abnormal gait patterns of high-fall-risk individuals compared to low-fall-risk individuals, such as less knee flexion and a tendency to tilt the pelvis forward during turning.

Tailoring Interfaces for Enhanced Methanol Production from Photoelectrochemical CO2 Reduction.

Efficient and stable photoelectrochemical reduction of CO2 into highly reduced liquid fuels remains a formidable challenge, which requires an innovative semiconductor/catalyst interface to tackle. In this study, we introduce a strategy involving the fabrication of a silicon micropillar array structure coated with a superhydrophobic fluorinated carbon layer for the photoelectrochemical conversion of CO2 into methanol. The pillars increase the electrode surface area, improve catalyst loading and adhesion without compromising light absorption, and help confine gaseous intermediates near the catalyst surface. The superhydrophobic coating passivates parasitic side reactions and further enhances local accumulation of reaction intermediates. Upon one-electron reduction of the molecular catalyst, the semiconductor-catalyst interface changes from adaptive to buried junctions, providing a sufficient thermodynamic driving force for CO2 reduction. These structures together create a unique microenvironment for effective reduction of CO2 to methanol, leading to a remarkable Faradaic efficiency reaching 20% together with a partial current density of 3.4 mA cm-2, surpassing the previous record based on planar silicon photoelectrodes by a notable factor of 17. This work demonstrates a new pathway for enhancing photoelectrocatalytic CO2 reduction through meticulous interface and microenvironment tailoring and sets a benchmark for both Faradaic efficiency and current density in solar liquid fuel production.

How Precisely Can Individual Molecules Be Analyzed? A Case Study on Locally Quantifying Forces and Energies Using Scanning Probe Microscopy.

Recent advances in scanning probe microscopy methodology have enabled the measurement of tip-sample interactions with picometer accuracy in all three spatial dimensions, thereby providing a detailed site-specific and distance-dependent picture of the related properties. This paper explores the degree of detail and accuracy that can be achieved in locally quantifying probe-molecule interaction forces and energies for adsorbed molecules. Toward this end, cobalt phthalocyanine (CoPc), a promising CO2 reduction catalyst, was studied on Ag(111) as a model system using low-temperature, ultrahigh vacuum noncontact atomic force microscopy. Data were recorded as a function of distance from the surface, from which detailed three-dimensional maps of the molecule's interaction with the tip for normal and lateral forces as well as the tip-molecule interaction potential were constructed. The data were collected with a CO molecule at the tip apex, which enabled a detailed visualization of the atomic structure. Determination of the tip-substrate interaction as a function of distance allowed isolation of the molecule-tip interactions; when analyzing these in terms of a Lennard-Jones-type potential, the atomically resolved equilibrium interaction energies between the CO tethered to the tip and the CoPc molecule could be recovered. Interaction energies peaked at less than 160 meV, indicating a physisorption interaction. As expected, the interaction was weakest at the aromatic hydrogens around the periphery of the molecule and strongest surrounding the metal center. The interaction, however, did not peak directly above the Co atom but rather in pockets surrounding it.

Identification and validation of stemness-based and ferroptosis-related molecular clusters in pancreatic ductal adenocarcinoma.

Pancreatic ductal adenocarcinoma (PDAC) is a highly lethal malignancy with an extremely poor prognosis. Cancer stem cells (CSCs) are considered to be responsible for the poor survival, recurrence and therapy resistance of PDAC. Ferroptosis plays a crucial role in the sustain and survival of CSCs. Here, we employed a rigorous evaluation of multiple datasets to identify a novel stemness-based and ferroptosis-related genes (SFRGs) signature to access the potential prognostic application. This work we retrieved RNA-sequencing and clinical annotation data from the TCGA, ICGC, GTEx and GEO database, and acquired 26 stem cell gene sets and 259 ferroptosis genes from StemChecker database and FerrDb database, respectively. Based on consensus clustering and ssGSEA analysis, we identified two expression patterns of CSCs traits (C1 and C2). Then, WGCNA analysis was implemented to screen out hub module genes correlated with stemness. Furthermore, differential expression analysis, Pearson correlation analysis, and the Least absolute shrinkage and selection operator (LASSO) and Cox regression were performed to identify the SFRGs and to construct model. In addition, the differences in prognosis, tumor microenvironment (TME) components and therapy responses were evaluated between two risk groups. Finally, we verified the most influential marker ARNTL2 experimentally by western blot, qRT-PCR, sphere formation assay, mitoscreen assay, intracellular iron concentration determination and MDA determination assays. In conclusion, we developed a stemness-based and ferroptosis-related prognostic model, which could help predict overall survival for PDAC patients. Targeting ferroptosis may be a promising therapeutic strategy to inhibit PDAC progression by suppressing CSCs.

Insights into Materials, Physics, and Applications in Flexible and Wearable Acoustic Sensing Technology.

Sound plays a crucial role in the perception of the world. It allows to communicate, learn, and detect potential dangers, diagnose diseases, and much more. However, traditional acoustic sensors are limited in their form factors, being rigid and cumbersome, which restricts their potential applications. Recently, acoustic sensors have made significant advancements, transitioning from rudimentary forms to wearable devices and smart everyday clothing that can conform to soft, curved, and deformable surfaces or surroundings. In this review, the latest scientific and technological breakthroughs with insightful analysis in materials, physics, design principles, fabrication strategies, functions, and applications of flexible and wearable acoustic sensing technology are comprehensively explored. The new generation of acoustic sensors that can recognize voice, interact with machines, control robots, enable marine positioning and localization, monitor structural health, diagnose human vital signs in deep tissues, and perform organ imaging is highlighted. These innovations offer unique solutions to significant challenges in fields such as healthcare, biomedicine, wearables, robotics, and metaverse. Finally, the existing challenges and future opportunities in the field are addressed, providing strategies to advance acoustic sensing technologies for intriguing real-world applications and inspire new research directions.

Active Sites of Cobalt Phthalocyanine in Electrocatalytic CO2 Reduction to Methanol.

Many metal coordination compounds catalyze CO2 electroreduction to CO, but cobalt phthalocyanine hybridized with conductive carbon such as carbon nanotubes is currently the only one that can generate methanol. The underlying structure-reactivity correlation and reaction mechanism desperately demand elucidation. Here we report the first in situ X-ray absorption spectroscopy characterization, combined with ex situ spectroscopic and electrocatalytic measurements, to study CoPc-catalyzed CO2 reduction to methanol. Molecular dispersion of CoPc on CNT surfaces, as evidenced by the observed electronic interaction between the two, is crucial to fast electron transfer to the active sites and multi-electron CO2 reduction. CO, the key intermediate in the CO2 -to-methanol pathway, is found to be labile on the active site, which necessitates a high local concentration in the microenvironment to compete with CO2 for active sites and promote methanol production. A comparison of the electrocatalytic performance of structurally related porphyrins indicates that the bridging aza-N atoms of the Pc macrocycle are critical components of the CoPc active site that produces methanol. In situ X-ray absorption spectroscopy identifies the active site as Co(I) and supports an increasingly non-centrosymmetric Co coordination environment at negative applied potential, likely due to the formation of a Co-CO adduct during the catalysis.

Genome-wide CRISPR/Cas9 screening for drug resistance in tumors.

Genome-wide clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR associated nuclease 9 (Cas9) screening is a simple screening method for locating loci under specific conditions, and it has been utilized in tumor drug resistance research for finding potential drug resistance-associated genes. This screening strategy has significant implications for further treatment of malignancies with acquired drug resistance. In recent years, studies involving genome-wide CRISPR/Cas9 screening have gradually increased. Here we review the recent application of genome-wide CRISPR/Cas9 screening for drug resistance, involving mitogen-activated protein kinase (MAPK) pathway inhibitors, poly (ADP-ribose) polymerase inhibitors (PARPi), alkylating agents, mitotic inhibitors, antimetabolites, immune checkpoint inhibitors (ICIs), and cyclin-dependent kinase inhibitors (CDKI). We summarize drug resistance pathways such as the KEAP1/Nrf2 pathway MAPK pathway, and NF-κB pathway. Also, we analyze the limitations and conditions for the application of genome-wide CRISPR/Cas9 screening techniques.

Low-Temperature-Solid Combustion Technology of Biomass for Pollution Reduction: Potentials and Necessary Fundamentals.

The high temperature of solid combustion in modern combustors leads to serious pollution in the combustion of biomass and solid wastes. The broad demands of relatively small-scale combustion of solid fuels and the imposition of increasingly strict emission limits require more economical methods for pollution reduction. Based on literature and our own work, low-temperature-solid combustion technology, which applies low temperature for solids but normal temperature for gas during combustion, was introduced in this paper. The potential of this technology in pollution reduction was analyzed, and necessary fundamentals for equipment design/operation were discussed. It showed that, for straws, more than 60% of deposit and particle emission can be reduced and 100% of ash can be recycled when the solid temperature is <600 °C. Fundamentals on rates of inorganic release, char oxidation, phase transformation in the condensed phase, and NOx/SOx release are necessary for better application of the technology.

Regulation of iron metabolism and ferroptosis in cancer stem cells.

The ability of cancer stem cells (CSCs) to self-renew, differentiate, and generate new tumors is a significant contributor to drug resistance, relapse, and metastasis. Therefore, the targeting of CSCs for treatment is particularly important. Recent studies have demonstrated that CSCs are more susceptible to ferroptosis than non-CSCs, indicating that this could be an effective strategy for treating tumors. Ferroptosis is a type of programmed cell death that results from the accumulation of lipid peroxides caused by intracellular iron-mediated processes. CSCs exhibit different molecular characteristics related to iron and lipid metabolism. This study reviews the alterations in iron metabolism, lipid peroxidation, and lipid peroxide scavenging in CSCs, their impact on ferroptosis, and the regulatory mechanisms underlying iron metabolism and ferroptosis. Potential treatment strategies and novel compounds targeting CSC by inducing ferroptosis are also discussed.

Well-Defined Iron Sites in Crystalline Carbon Nitride.

Carbon nitride materials can be hosts for transition metal sites, but Mössbauer studies on iron complexes in carbon nitrides have always shown a mixture of environments and oxidation states. Here we describe the synthesis and characterization of a crystalline carbon nitride with stoichiometric iron sites that all have the same environment. The material (formula C6N9H2Fe0.4Li1.2Cl, abbreviated PTI/FeCl2) is derived from reacting poly(triazine imide)·LiCl (PTI/LiCl) with a low-melting FeCl2/KCl flux, followed by anaerobic rinsing with methanol. X-ray diffraction, X-ray absorption and Mössbauer spectroscopies, and SQUID magnetometry indicate that there are tetrahedral high-spin iron(II) sites throughout the material, all having the same geometry. The material is active for electrocatalytic nitrate reduction to ammonia, with a production rate of ca. 0.1 mmol cm-2 h-1 and Faradaic efficiency of ca. 80% at -0.80 V vs RHE.

Design of a Sensor-Technology-Augmented Gait and Balance Monitoring System for Community-Dwelling Older Adults in Hong Kong: A Pilot Feasibility Study.

Routine assessments of gait and balance have been recognized as an effective approach for preventing falls by issuing early warnings and implementing appropriate interventions. However, current limited public healthcare resources cannot meet the demand for continuous monitoring of deteriorations in gait and balance. The objective of this study was to develop and evaluate the feasibility of a prototype surrogate system driven by sensor technology and multi-sourced heterogeneous data analytics, for gait and balance assessment and monitoring. The system was designed to analyze users' multi-mode data streams collected via inertial sensors and a depth camera while performing a 3-m timed up and go test, a five-times-sit-to-stand test, and a Romberg test, for predicting scores on clinical measurements by physiotherapists. Generalized regression of sensor data was conducted to build prediction models for gait and balance estimations. Demographic correlations with user acceptance behaviors were analyzed using ordinal logistic regression. Forty-four older adults (38 females) were recruited in this pilot study (mean age = 78.5 years, standard deviation [SD] = 6.2 years). The participants perceived that using the system for their gait and balance monitoring was a good idea (mean = 5.45, SD = 0.76) and easy (mean = 4.95, SD = 1.09), and that the system is useful in improving their health (mean = 5.32, SD = 0.83), is trustworthy (mean = 5.04, SD = 0.88), and has a good fit between task and technology (mean = 4.97, SD = 0.84). In general, the participants showed a positive intention to use the proposed system in their gait and balance management (mean = 5.22, SD = 1.10). Demographic correlations with user acceptance are discussed. This study provides preliminary evidence supporting the feasibility of using a sensor-technology-augmented system to manage the gait and balance of community-dwelling older adults. The intervention is validated as being acceptable, viable, and valuable.

Constructing lignin based nanoparticles towards flame retardant thermoplastic polyurethane composites with improved mechanical and oxidation resistant properties.

A multifunctional lignin derivative nanoparticle (C-P-Lignin) was synthesized by grafting phenyl dichloro sphosphineoxid and 1, 4-dimethoxyacetylene stepwise on the lignin, then it was applied to prepare the thermoplastic polyurethane (TPU) composite with improved mechanical properties, oxidation resistance, and flame retardancy. The tensile strength, the elongation at break, and the toughness of the TPU/2C-P-Lignin sample reached 28.3 MPa, 941 %, and 139.0 MJ/m2 respectively, which were increased by 39.0 %, 3.4 %, and 33.9 % respectively compared with that of the control TPU sample. The anti-fatigue property was also improved. More importantly, the mechanism of the improved mechanical properties was also calculated and simulated by FTIR and Materials Studio software. The TPU/2C-P-Lignin sample exhibited superior oxidation resistance during the process of photoaging and thermal oxidative aging. Furthermore, the peak heat release rate and the smoke production rate for theTPU/2C-P-Lignin sample was reduced by 50.0 % and 53.8 % compared with that of the control TPU. The reason was that the C-P-Lignin is conducive to the formation of uniformly distributed carbon layers. It is expected that this work can provide a new method for expanding the utilization of waste wood as a multifunctional lignin-based filler to improve fire safety and extend the service life of TPU polymers.

Effects of lumbar-pelvic training combined with electroacupuncture on chronic nonspecific low back pain.

This observational study was conducted to investigate the effect of lumbar-pelvic training (LP) combined with electroacupuncture (EA) in the treatment of chronic nonspecific low back pain. One hundred and twenty patients diagnosed with chronic nonspecific low back pain were evenly randomized to receive the following 4 treatments for 2 weeks: LP combined with EA (Group A), EA (Group B), LP (Group C) or no intervention (Group D). The LP was a self-developed training program containing 5 movements and was conducted three times a week to build up the strength of abdomen muscle groups. Four acupoints along the foot-taiyang bladder meridian and the governor vessel were chosen for EA five times a week based on the theory of Traditional Chinese Medicine. The Visual Analog Scale and Oswestry Disability Index were measured before and after treatment to assess the reduction of pain intensity and functional disability, respectively. Following the treatments, Visual Analog Scale and Oswestry Disability Index scores in all 3 intervention groups were significantly lower than those in the Group D without intervention (P < .01). Among the intervention groups, Group A's scores were lower than those of Group B or Group C (P < .01). The overall efficacy of Group A was 93.33%, which was higher than that of Group B (76.67%) and Group C (70.00%) (P < .01). In conclusion, this study suggest that our self-developed lumbar-pelvic training combined with electroacupuncture is effective for chronic nonspecific low back pain in terms of pain and disability reduction.